Nortel Networks 450 manual Default Settings

Default Settings

Table F-1. Factory Default Settings for the BayStack 450 Switch (continued)

Field	Default setting	Appears in this CI screen
Bridge Priority	8000 (read only)	Spanning Tree Switch Settings
		(page 3-72)
Designated Root	8000 (bridge_id) (read only)
Root Port	0 (read only)
Root Path Cost	0 (read only)
Hello Time	2 seconds (read only)
Maximum Age Time	20 seconds (read only)
Forward Delay	15 seconds (read only)
Bridge Hello Time	2 seconds (read only)
Bridge Maximum Age Time	20 seconds (read only)
Bridge Forward Delay	15 seconds (read only)
TELNET Access	Enabled	TELNET Configuration (page 3-75)
Login Timeout	1 minute
Login Retries	3
Inactivity Timeout	15 minutes
Event Logging	All
Allowed Source IP Address	First field: 0.0.0.0
(10 user-configurable fields)	(no IP address assigned)
	Remaining nine fields:
	255.255.255.255
	(any address is allowed)
Allowed Source Mask	First field: 0.0.0.0
(10 user-configurable fields)	(no IP address assigned)
For details about this field, see	Remaining nine fields:
	255.255.255.255
Table 3-27 on page 3-76.
	(any address is allowed)
Image Filename	Zero-length string	Software Download (page 3-78)
TFTP Server IP Address	0.0.0.0
	(no IP address assigned)
Start TFTP Load of New Image	No
		(continued)

302401-D Rev 00 F-5