Using the BayStack 450 10/100/1000 Series Switch
#Caution
#Omitting a Forward slash (/) when the entry is continued to the next
#line, can cause the interruption of the booting process or the
#incorrect image file to download. Always include forward slashes
#where needed.
#
#Important Note:
#If a leading zero (0) is used in the IP address it is calculated as an
#octal number. If the leading character is "x" (upper or lower case),
#it is calculated as a hexadecimal number. For example, if an IP address
#with a base 10 number of 45 is written as .045 in the BOOTPTAB.TXT file,
#the Bootp protocol assigns .037 to the client.
#
#Global entries are defined that specify the parameters used by every device.
#Note that hardware type (ht) is specified first in the global entry.
#
#The following global entry is defined for an Ethernet device. Note that this
#is where a client's subnet mask (sm) and default gateway (gw) are defined.
global1/
ht=ethernet/
hd=c:\opt\images/
sm=255.255.255.0/
gw=192.0.1.0
#The following sample entry describes a BootP client:
bay1ht=ethernetha=0060fd000000ip=192.0.0.1hd=c:\ezlan\imagesbf=b450_100.img
# Where: |
| |
# | host name: | bay1 |
# | hardware type: | Ethernet |
# | MAC address: | |
# | IP address: | 192.0.0.1 |
#home directory of boot file: c:\ezlan\images
# | boot file: | b450_100.img |
