Nortel Networks 450 manual Address-Based Mirroring Configuration Example

Using the BayStack 450 10/100/1000 Series Switch

Address A

StackProbe	Monitor port
	(port 23)
S1
T1
F
F
S2
T2
S3

Address B

BS45033A

Figure 1-52. Address-Based Mirroring Configuration Example

In this configuration, the designated monitor port (port 23) can be set to monitor traffic in any of the following modes:

•Monitor all traffic transmitted from address A to any address.

•Monitor all traffic received by address A from any address.

•Monitor all traffic received by or transmitted by address A.

•Monitor all traffic transmitted by address A to address B.

•Monitor all traffic between address A and address B (conversation between the two stations).

Figure 1-53 shows the Port Mirroring Configuration screen setup for this example.

1-80 302401-D Rev 00