Nortel Networks 450 Appendix F Default Settings, Field Default setting Appears in this CI screen

Appendix F

Default Settings

Table F-1 lists the factory default settings for the BayStack 450 switch.

Table F-1. Factory Default Settings for the BayStack 450 Switch

Field	Default setting	Appears in this CI screen
BootP Request Mode	BootP Disabled	IP Configuration/Setup (page 3-8)
In-Band Stack IP Address	0.0.0.0
	(no IP address assigned)
In-Band Switch IP Address	0.0.0.0
	(no IP address assigned)
In-Band Subnet Mask	0.0.0.0
	(no subnet mask assigned)
Default Gateway	0.0.0.0
	(no IP address assigned)
Read-Only Community String	public	SNMP Configuration (page 3-13)
Read-Write Community String	private
Trap IP Address	0.0.0.0
	(no IP address assigned)
Community String	Zero-length string
Authentication Trap	Enabled
Link Up/Down Trap	Enabled
sysContact	Zero-length string	System Characteristics (page 3-15)
sysName	Zero-length string
sysLocation	Zero-length string
		(continued)

302401-D Rev 00 F-1