Nortel Networks 450 manual To configure the Vlan port membership for Vlan

Using the BayStack 450 10/100/1000 Series Switch

To configure the VLAN port membership for VLAN 1:

1.Select Switch Configuration from the BayStack 450-12T Main Menu (or press w).

2.From the Switch Configuration Menu, select VLAN Configuration (or press v).

3.From the VLAN Configuration Menu select VLAN Configuration (or press v).

The default VLAN Configuration screen opens (Figure 1-26):

VLAN	Configuration
Create	VLAN:	[	1 ]
Delete VLAN:		[	]
VLAN Name:		[ VLAN #1 ]

Port Membership

1-6	7-12
------	------
Unit #1 UUUUUU	UUUUUU

KEY: T = Tagged Port Member, U = Untagged Port Member, - = Not a Member of VLAN Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-26. Default VLAN Configuration Screen Example

The VLAN Configuration screen settings shown in Figure 1-26 are default settings with all switch ports classified as untagged members of VLAN 1.

Figure 1-27 shows the VLAN Configuration screen after it is configured to support the VLAN 3 broadcast domain shown in Figure 1-25 (VLAN Name is optional).

1-42 302401-D Rev 00