Nortel Networks 450 manual Trunk Configuration Screen for Switch S2

BayStack 450 10/100/1000 Series Switches

Trunk Configuration Screen for Switch S2

As shown in Figure 1-40 on page 1-59, switch S2 is set up with two trunk configurations (T2 and T3). Both trunks connect directly to switch S1.

As in the previous screen examples, to set up a trunk configuration, choose MultiLink Trunk Configuration from the MultiLink Trunk Configuration Menu screen.

Figure 1-43 shows the MultiLink Trunk Configuration screen for switch S2.

MultiLink Trunk Configuration
Trunk Trunk Members (Unit/Port)	STP Learning Trunk Mode	Trunk Status

----- ------------------------------- ------------ --------------- ------------

1

[

/25 ][

/26 ][

/

][

/

] [ Normal

]

Basic

[ Enabled

]

2

[

/1

][

/3

][

/

][

/

] [ Normal

]

Basic

[ Enabled

]

3

[

/

][

/

][

/

][

/

] [ Normal

]

Basic

[ Disabled ]

4

[

/

][

/

][

/

][

/

] [ Normal

]

Basic

[ Disabled ]

5

[

/

][

/

][

/

][

/

] [ Normal

]

Basic

[ Disabled ]

6

[

/

][

/

][

/

][

/

] [ Normal

]

Basic

[ Disabled ]

Trunk

Trunk Name

-----------------------

1 [ S2:T2 to S1 ]

2 [ S2:T3 to S1 ]

3 [ Trunk #3 ]

4 [ Trunk #4 ]

5 [ Trunk #5 ]

6 [ Trunk #6 ]

Enter text, press <Return> or <Enter> when complete.

Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Figure 1-43. MultiLink Trunk Configuration Screen for Switch S2

Switch S2 is configured as follows:

•Trunk (read only) indicates the trunks (1 to 6) that correspond to the switch ports specified in the Trunk Members fields.

•Trunk Members (Unit/Port) indicates the ports that can be configured, in each row, to create the corresponding trunk:

Ports 25 and 26 are assigned as trunk members of trunk 1.

302401-D Rev 00 1-63