EMC DS-16B2 manual Logging In to a Switch, Switch55admin

1

Setting the Initial Switch Configuration

Logging In to a Switch

The switch must be connected to an IP network through the RJ-45 port to enable a connection through Telnet. Refer to the Departmental Switch DS-16B2 Hardware Reference Manual for more information about connecting the switch to your IP network.

To log into a Departmental Switch DS-16B2 switch:

1.Open a Telnet connection to the switch. The login prompt displays if the Telnet connection successfully found the switch in the network.

The default IP address is 10.77.77.77

2.At the login prompt, enter the user ID that you use to login, for example:

login: admin

The password prompt displays if the user exists.

3.Enter the password for the user: password: xxxxxx

The default password is password.

If the login was successful, a prompt displays showing the name of the switch and user ID you are logged in as, for example:

switch55:admin>

1-2 Departmental Switch Model DS-16B2 Fabric OS Procedures Manual