EMC DS-16B2 manual Displaying a Summary of Port Errors, Error Type Description

Displaying Error Logs and Status

Displaying a Summary of Port Errors

This command displays a summary of port errors for all the ports in a single switch.

To display a summary of port errors for a switch:

1. Log in to the switch as the admin user.

2. At the command line enter the following command:

portErrshow

The display contains one output line per port. Table 4-1 explains the types of errors counted:

Table 3-1	Error Summary Descriptions
	Error Type	Description
	frames tx	Frames transmitted.
	frames rx	Frames received.
	enc in	Encoding errors inside frames.
	crc err	Frames with CRC errors.
	too shrt	Frames shorter than minimum.
	too long	Frames longer than maximum.
	bad eof	Frames with bad end-of-frame delimiters.
	enc out	Encoding error outside of frames.
	disc c3	Class 3 frames discarded.
	link fail	Link failures (LF1 or LF2 states).
	loss sync	Loss of synchronization.
	loss sig	Loss of signal.
	frjt	Frames rejected with F_RJT.
	fbsy	Frames busied with F_BSY.

Displaying a Summary of Port Errors 3-3

3