Basic Switch Configuration Procedures
Restoring the System Configuration Settings
To restore the system configuration settings from a backup:
1.Verify that the RSHD service (on UNIX hosts only) or the FTP service (on a UNIX or Windows host) is running on the host workstation.
2.Log in to the switch as the admin user.
3.Shut down the switch by entering the following command: switchDisable
4.At the command line, enter the following command:
configDownload hostIPaddr, user, path_filename, password
5.Press ENTER.
The dialog box prompts you to enter the Host IP address, User Name, Filename, and password.
The password operand is only required if you are using FTP.
6.Reboot the switch by entering the following command: fastBoot
Restoring the System Configuration Settings | |
|
|
2
