2
Basic Switch Configuration Procedures
Upgrading or Restoring the Switch Firmware
To upgrade or restore the switch firmware:
1.Verify that the RSHD service/utilities or the FTP service is running on the host workstation.
2.Log in to the switch as the admin user.
3.At the command line, enter the following command: firmwareDownload
4.Press ENTER.
The system prompts you to enter the Host IP address, User Name, Filename, and password.
The password operand is only required if you are using FTP.
5.Reboot the switch by entering the following command: fastBoot
Disabling a Switch
To disable a switch:
1.Log in to the switch as the admin user.
2.At the command line, enter the following command: switchDisable
All Fibre Channel ports on the switch are taken offline. If the switch was part of a fabric, the remaining switches reconfigure.
Departmental Switch | |
|
|
