Displaying Error Logs and Status
Displaying Information About a Switch
To display switch information:
1.Login to the switch as the admin user.
2.At the command line, enter the following command: switchShow
This command displays the following information for a switch:
•switchName — The name of the switch
•switchType — The model and firmware version numbers of the switch
•switchState — The Online, Offline, Testing, or Faulty state of the switch.
•switchRole — The Principal, Subordinate, or Disabled role of the switch
•switchDomain — The Domain ID of the switch.
•switchId — The embedded port D_ID of the switch.
•switchWwn — The World Wide Name of the switch.
•switchBeacon — The beaconing state: either ON or OFF of the switch.
This command also displays the following information for ports on the specified switch:
•Module type — The SFP type if an SFP is present.
•Port speed — The speed of the Port (1G, 2G, N1, N2, or AN). The speed can be fixed, negotiated, or auto negotiated.
•Port state — The port status.
•Comment — Displays information about the port. This can be blank or can include WWN for F_Port or E_Port, Trunking state, upstream, or downstream status.
For more information, refer to the switchShow command in the
Departmental Switch Model
Displaying Information About a Switch | |
|
|
3
