Miele KM5773 installation instructions Sensor switches, Switching on

Use

Sensor switches

This hob is equipped with electronic sensor switches which react to finger contact.

To operate a cooking zone, touch the relevant sensor switch. Each time you touch a sensor switch, an audible tone sounds.

Take care only to touch the middle of the sensor required. Keep the control panel clean, and do not place anything on top of it. The sensors may fail to react or they could mistake the article or any dirt for a fingertip contact, thereby activating a function or even causing the hob to switch off automatically (see Safety switch-off.)

Never place hot pans on the sensor switches. The electronic unit underneath could get damaged.

Switching on

The hob must be switched on before any of the zones can be used.

To switch the hob on:

^Touch the ON/OFF sensor s.

0 appears in each of the cooking zone displays. 00 appears in the Timer/Memory display. If no further entry is made, the hob will switch itself off after a few seconds for safety reasons.

To switch a cooking zone on:

^Select a power level between 1 and 12 by touching the - or + sensor.

To select cooking with Auto heat-up, press the - sensor first (see "Auto heat-up"). To select cooking without Auto heat-up, press the + sensor first.

If you wish to switch on another cooking zone, and the 0 for that zone has already gone out, simply press the

-or + briefly. The 0 will reappear and you can select a power level (with or without Auto heat-up).

20