Problem solving guide
... one of the following has occurred:
–The booster has automatically switched off early.
–The set power level 10, 11 or 12 is alternating in the display with a lower power level. The reduced power level is also indicated by the number of lines in the
The overheating protection mechanism has been triggered (see "Overheating protection").
... numbers light up in the Timer display, and A, F and numbers light up in the cooking zone displays, when the hob is switched off
The sensitivity level of the sensors has altered and they are unable recalibrate automatically. The sensors must be recalibrated manually (see "Calibrating the sensor switches").
If this does not solve the problem, please call the Miele Service department.
... the food in the pan hardly heats up or does not heat up at all when the Auto
This could be because:
–there is too much food in the pan.
–the pan is not conducting heat properly.
Select a higher continued cooking setting next time, or start cooking at the highest setting and then turn down to a lower setting manually later on.
... an F appears in the display for the left hand cooking zones, an E appears in the display for the right hand cooking zones and numbers appear in the timer display
Interrupt the power supply to the hob for approx. 1 minute.
If the problem persists after reconnecting the appliance to the power supply, please contact the Miele Service department.
... the cooling fan continues to run after the appliance has been switched off
This is not a fault. The fan will continue running until the appliance has cooled down. It will then switch itself off automatically.
41