Problem solving guide
Installation work and repairs to electrical appliances must only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations (BS 7671 in the UK). Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
What to do if, ...
... the hob or cooking zones cannot be switched on
Check whether
–the pans being used are suitable.
–the safety lock is activated.
If necessary, deactivate it (see "Safety lock").
–the mains fuse has blown.
If none of the above is the case, then disconnect the appliance from the electricity supply for approx. 1 minute. To do this:
–switch off at the mains, or
–withdraw the mains fuse.
Reset the trip switch in the mains fuse box, and switch the appliance back on. If it still will not switch on, contact a qualified electrician or the Miele Service Department.
... the hob can be switched on and settings selected, but the cooking zones do not heat up
Check whether you set the
... an ß appears in the display for a cooking zone
Check whether
–the zone was switched on by mistake without a pan on it.
–the pan being used is suitable for use on an induction zone, and that it is large enough (see "Suitable pans").
... an individual cooking zone or the whole hob has switched itself off automatically
The safety
40
