HP LQH-HW 3ULQWHUV manual Configuration Using The Printer Control Panel, NET Ready will display

Configuration Using The Printer Control Panel

8.Press the LEFT or RIGHT arrow key to select the portion of the IP Address to be changed.

9.Press the DOWN arrow key.

10.Press the LEFT or RIGHT arrow key to select the desired value.

11.Press the ENTER key to make the selection. An asterisk appears to the right of the value.

12.Press the UP arrow key and you will be returned to step 8. When you are finished changing parameters, exit the configuration menus and lock the ENTER key. (For instructions, refer to “Locking And Unlocking The ENTER Key” on page 42.)

Caution	When a change is made from the control panel, the LineJet Print
	Server is re-initialized. The messages “E-NET RESET” and “E-NET
	INIT” display on the control panel. This process takes several
	minutes. Make sure not to shut the printer off or make further
	changes to the LineJet Print Server settings during this initialization
	period to prevent a loss of LineJet Print Server configuration
	information. When the initialization is complete, the message
	“E-NET READY” will display.

63