HP LQH-HW 3ULQWHUV manual Set snmp, Set user passwd snmp snmppassword

Set Commands

set snmp

To add a user named snmp with root privileges, please follow the steps below:

1.Login to the LineJet Print Server as a root user.

2.Add a user named snmp. set user add snmp

3.Set the user type to root. set user type snmp root

4.Set the password for the snmp user.

set user passwd snmp snmppassword

5.Save the changes. save

The user snmp is now created and snmppassword is the only community string which will allow write access.

set snmp manager index ipaddress trap-community

The Print Server continuously generates traps, but unless the trap table is filled in, no SNMP manager will receive this information. To set the Print Server to send traps to a particular SNMP manager, use this command to add an SNMP manager to the trap table.

index is the index number of the trap table. ipaddress is the IP address of the SNMP manager receiving traps. trap-communityis the community string sent along with the trap information.

set sysinfo name newname

set sysinfo name salesprinter

Set a descriptive name defined by newname for LineJet Print Server identification purposes. This is not used in the operation of the print server in any way.

set sysinfo location description

set sysinfo location salesdept

Set the physical location of the LineJet Print Server. This is for identification purposes and is not used in the operation of the print server in any way.

set sysinfo contact contactname

set sysinfo contact Paul_Harris

Set a person or department to contact in case of print server trouble.

227