HP LQH-HW 3ULQWHUV manual Setting The LineJet Print Server Context NDS

Chapter 11 Novell LineJet Print Server Configuration (10/100Base-T)

2. Direct your Web browser to URL:

		http://LineJetIPaddress/networkConf.html
		(e.g., http://192.75.11.9/networkConf.html)
Note		If prompted for a User ID and password first, type in root for the ID and
		press ENTER at the password prompt since there is no password by
		default.
	3.	Look under the “Novell” section and go to the “Service Type” field to
		select the appropriate mode.
	4.	Click on the SUBMIT button when done and physically re-power the
		printer to make the new settings take effect.
	Manual (Telnet) Method
	1.	Telnet to the print server. This will bring up a login screen:
		telnet ipaddress
Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.
	2.	You should now see a prompt displayed that has the LineJet Print
		Server’s IP address followed by a colon then root.
		ipaddress:root>
	3.	At the prompt, enter:
		store pserver novell mode [nds bindery auto]
	4.	Reset the unit to make the changes take effect.
		reset

Setting The LineJet Print Server Context (NDS)

The LineJet Print Server allows you to store the print server object in any context within the NDS tree you choose. By default, the LineJet Print Server will look for the print server object in the same context as the file server object it connects to is stored in.

HTML Method

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP.

2.Direct your Web browser to URL:

http://LineJetIPaddress/networkConf.html (e.g., http://192.75.11.9/networkConf.html)

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

204