HP LQH-HW 3ULQWHUV manual Store rprinter add pservername printernumber, LineJetdestination

RPRINTER/NPRINTER Setup (Netware 3.x and 4.x)

5.Click on “Enabled” and enter the name used with the PSERVER.NLM started in step 1 into the “Print Server Name” field.

Note	If it is an NDS pserver, only enter the PSERVER name and not the context
	(e.g., sales_ps).

6.Enter the printer number of the printer you would like serviced into the “Printer Number” field, and then select the destination on the LineJet Print Server you would like to use for output.

7.Repeat steps 4 through 6 for each additional printer you would like to have serviced.

8.Click on the SUBMIT button when done and physically re-power the printer to make the new settings take effect.

Manual (Telnet) Method

1.Load a PSERVER on your Netware 3.x or Netware 4.x file server (i.e., issue a load pserver pservername command on the file server).

Note	If it is an NDS PSERVER on a Netware 4.x file server, you must specify the
	pserver name and context for pservername. For example:
	load pserver .sales_ps.sales.hp
	2. Telnet to the print server. This will bring up a login screen:
	telnet ipaddress
Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.
	3. You should now see a prompt displayed that has the LineJet Print
	Server’s IP address followed by a colon then root.
	ipaddress:root>
	4. At the prompt, store the RPRINTER settings on the LineJet Print Server.
	The pservername refers to the existing PSERVER.NLM on the file
	server created in step 1.
	Syntax:
	store rprinter add pservername printernumber
	LineJetdestination
	Example for an RPRINTER servicing printer 0 of the PSERVER.NLM
	called pserver1 and sending jobs to the LineJet Print Server destination
	d1prn:
	store rprinter add pserver1 0 d1prn
Note	If it is an NDS pserver, only enter the PSERVER name and not the context
	(e.g., sales_ps).

211