HP LQH-HW 3ULQWHUV manual Changing The Print Server Name NDS & Bindery

Changing The Print Server Name (NDS & Bindery)

	4.	Change the “Service Interval” to the desired number (in seconds).
Note	You may also want to change the “Service mode for forms” to “Change
	forms as needed.” If you do not do this, the LineJet Print Server will need to
	poll the file server twice as much to get all the information it needs.
	5.	Re-power the LineJet Print Server by turning the printer off and on to
		make the changes take effect.

Netware 3.x

1.Enter PCONSOLE as supervisor on your Novell host.

2.Select “Print Server Information” from the main menu and press ENTER.

3.Select the print server you have been using for your PSERVER setup and press ENTER. By default, this will be M_xxxxxx where xxxxxx equals the last six digits of the print server’s Ethernet address found on the bottom of the device (e.g., M_091C1A).

4.Select “Print Server Configuration” from the menu that displays.

5.Select “Printer Configuration” from the next menu to display a list of configured printers.

6.Select the printer for which you wish to alter the poll time and press

ENTER.

7.Change the “Sampling Interval” to the desired number (in seconds).

Note	You may also want to change the “Service mode for forms” to “Change
	forms as needed.” If you do not do this, the LineJet Print Server will need to
	poll the file server twice as much to get all the information it needs.

8.Press ESCAPE and select “Yes” to save the changes to this new printer.

9.Re-power the LineJet Print Server by turning the printer off and on to make the changes take effect.

Changing The Print Server Name (NDS & Bindery)

When defining a new print queue on a Novell file server, a new print server must be defined to represent the LineJet Print Server. This name must match the pre-defined name given to the print server. By default, this name is in the format M_xxxxxx where xxxxxx equals the last six digits of the LineJet Print Server’s Ethernet address found on the bottom of the device

(e.g., M_091C1A). You must make sure that the print server object that you are using for your PSERVER setup has the same name as that stored on the LineJet Print Server. If you need to rename the print server object in Netware Administrator, please delete the object and re-create it with the new name.

Netware administrator seems to have some problems with renaming objects.

Note	Changing the name will effect all of the protocols that are running on the
	LineJet Print Server.

201