HP LQH-HW 3ULQWHUV manual RPRINTER/NPRINTER Setup Netware 3.x, Load pserver .salesps.sales.hp

Chapter 11 Novell Host Configuration (10/100Base-T)

	RPRINTER/NPRINTER Setup (Netware 3.x and 4.x)
	This procedure associates an existing PSERVER with a remote LineJet Print
	Server acting as a RPRINTER/NPRINTER in a NetWare 3.x or Netware 4.x
	environment. It is the PSERVER’s responsibility to get jobs from the queue
	and to pass them off to the LineJet Print Server acting as the remote printer.
	Unlike a PSERVER setup, the LineJet Print Server does not deal directly with
	the queues.
Note	As an RPRINTER/NPRINTER, the print server does not use a login ID. A
	non-LineJet Print Server print server such as PSERVER.NLM or
	PSERVER.EXE must be running for RPRINTER to operate. Also, if the
	LineJet Print Server loses a connection to a PSERVER, it will automatically
	reconnect when that server becomes available again.
	The following steps assume that you have created a PSERVER object in
	either Netware 3.x or Netware 4.x and have assigned printers and queues to
	it. If you have not already done this, do it now. The setup is similar to creating
	a PSERVER setup for the LineJet Print Server, except that there are no
	restrictions about which names may be used for the print server and printer
	objects.
Note	Write down the printer number(s) assigned to the printer(s) you are going
	to be using for this setup. You will need them in a later step.

HTML Method

1.Load a PSERVER on your Netware 3.x or Netware 4.x file server (i.e., issue a load pserver pservername command on the file server).

Note	If it is an NDS PSERVER on a Netware 4.x file server, you must specify the
	PSERVER name and context for pservername. For example:
	load pserver .sales_ps.sales.hp
	2.	Load a Web browser on a network station that can communicate with the
		print server over TCP/IP.
	3.	Direct your Web browser to URL:
		http://LineJetIPaddress/networkConf.html
		(e.g., http://192.75.11.9/networkConf.html)
Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.
	4.	Look under the “Novell” section and find a row in the RPRINTER
		category.

210