HP LQH-HW 3ULQWHUV manual Novell Host Configuration, NetWare Version 3.x Pserver Setup

Chapter 10 Novell Host Configuration

To use the HTML forms to define a print queue, do the following:

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP. The command to change the print server name is:

Syntax:

store pserver name newname

Example to change the name to micro1: store pserver name micro1

2.Direct your Web browser to URL

http://LineJetIPaddress/adminConf.html (e.g., http://192.75.11.9/adminConf.html)

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

3.At the Administration Configuration HTML form that displays, highlight the field beside the “Name” heading and type in the new name of the print server.

4.Click on the SUBMIT button when done and physically repower the printer to make the new setting take effect.

Novell Host Configuration

Under all versions of NetWare®, both PSERVER and RPRINTER setups are supported by the LineJet Print Server. Since a PSERVER setup is the most common, you will find the necessary steps to configure the LineJet Print Server as a PSERVER shown first. Configuration for RPRINTER and NPRINTER setup follow the PSERVER information.

Note	The LineJet Print Server can service up to four printers on one file server. It
	can not service multiple file servers at one time.

NetWare Version 3.x PSERVER Setup

To configure a print queue on a NetWare 3.1x network:

1.Log on to the Novell file server as supervisor.

2.Enter PCONSOLE.

3.Select “Print Queue Information” from the PCONSOLE Main Menu.

4.Press INSERT to add a new queue to the list of currently defined queues showing.

5.Type in the name of this new queue when prompted and press ENTER. This can be any name you would like.

6.Press ESCAPE to return to the Main Menu.

186