HP LQH-HW 3ULQWHUV Set sysinfo email emailname@IPaddress, Set sysinfo dns DNSserverIPaddress

Models: LQH-HW 3ULQWHUV

1 304
Download 304 pages 33.43 Kb
Page 228
Image 228

Chapter 12 Complete Command List

set sysinfo loginfo [-]sys [-]tcp [-]ipx [-]spx

set sysinfo loginfo -sys ipx

Set the LineJet Print Server debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups:

sys General system messages.

tcp TCP stack messages.

ipx IPX stack messages.

spx SPX stack messages.

Note

This is not printer or job logging information.

set sysinfo logport nullsyslog

set sysinfo logport null

Define where the debugging information should be sent to. This can be sent to an output device off of the LineJet Print Server I/O port or to a central TCP/IP host running a SYSLOG daemon. To set this host, use the command set sysinfo syslog hostIPaddress.

set sysinfo email emailname@IPaddress

set sysinfo email joe@192.75.11.5

Define the user email address to receive printer and job logging information from a particular logpath on the LineJet Print Server. emailname is the host or IP name of the user, and IPaddress is the IP address where the mail is stored on your network.

set sysinfo syslog hostIPaddress

set sysinfo syslog 192.75.11.30

Set the IP address of the host running the SYSLOG daemon. LineJet Print Server debugging or print job and printer logging information can be sent to that IP address.

set sysinfo dns DNSserverIPaddress

set sysinfo dns 192.75.11.2

Set your DNS server IP address so the LineJet Print Server can resolve host names when used with its built-in Telnet and Ping clients.

set sysinfo descramblekey hexvalue

set sysinfo descramblekey 1234

Set the key value used for descrambling print jobs that have passed through the npscramble utility on a TCP/IP host. This key is a four-digit hexadecimal value obtained from the host software, npscramble. Within the npscramble source code, there is a variable called SR_KEY which contains the default key value. This can be changed to any four-digit value you would like.

228

Page 228
Image 228
HP LQH-HW 3ULQWHUV manual Set sysinfo email emailname@IPaddress, Set sysinfo dns DNSserverIPaddress