The best infrared remote performance is achieved with the keypad installed away from any direct sunlight, plasma TV, and low voltage lighting controls. Also consider con- venience when choosing a location.
Choose a place that is easily seen from the position where a person is most likely to be located.
Check whether or not you can route the wire to the location you have chosen.
Keypad Installation
To install a
INSTALLER GUIDE
Route
Use the supplied 110 punchdown tool to connect each wire to its corresponding color labeled on the punchdown terminal (See page 12 for details).
Ensure jumper setting on the keypad is in the “RUN” position.
Mount the keypad in the electrical box and attach the cover plate. Repeat the steps until all keypads are installed.
13
