Zone On/Off
Press and release 
to turn on the UNO System Keypad. This also turns on the cor- responding CAV6.6’s room, and any pre- sets previously assigned will be activated, including settings for bass, volume, last source selected, etc. Press and release 
to turn off the UNO System Keypad. This will also put the corresponding CAV6.6’s room into a standby state.
System All On/Off
An “All On” command is issued by pressing
and holding for 3 seconds, after an ini- tial room has been turned on. An “All Off” command can be issued to all rooms by
pressing and holding 
after the room has been turned off.
System On Indicator
When the room is off, but the system is on
in another room, 
is illuminated by a green backlight and the "SYS ON" icon remains visible.
USER GUIDE
UNO-S2 Keypad User Menu
Source Select Button
scrolls through the six A/V source inputs and the Aux source. To change sources, press and release 
. As the sources are sequentially selected, each source's name appears on the keypad LCD panel. When a source is selected in more than one room, the “SHARED” icon will appear on all UNO Keypads using that
source. 
is also used to enter the User Menu with a press and hold action. (See next page for User Menu)
Volume Up/Down Buttons
The room’s audio output is adjusted using
F1 and F2 Buttons
The 
and 
buttons are user favorite presets. These presets can be selected at any time to recall source selection, vol- ume, favorite channel, disc, etc. To store a favorite preset: first, adjust the room set- tings and select a source to be stored.
Next, press and hold the desired 
or
continued
7
