Installation & Operation Manual

11 Operating information

Sequence of operation (continued)

 

 

 

OPERATION

 

 

DISPLAY

 

 

8. If the space heating call for heat is active, and the tank thermostat

 

or sensor starts a DHW call for heat, the boiler will switch to the

 

DHW mode. If programmed for normal DHW operation (not as a

 

zone), the DHW pump will turn on first, then the boiler pump will

 

turn

off

 

 

2

seconds

later.

 

This will divert the boiler’s outlet water from the heating system

 

and

send

it

to

the

tank

coil

instead.

 

The control will then modulate to maintain the outlet temperature

 

 

 

9. If the boiler is not part of a Cascade, and both the space heating

 

and DHW calls for heat remain active long enough, the boiler will

 

switch back and forth between the two heating modes until one of

 

them is satisfied.

 

 

 

 

 

 

 

 

 

10. Once both calls for heat are satisfied, the control will turn off the

 

burner. The blower will continue to run during a 10 second

 

postpurge.

 

 

 

 

 

 

 

 

 

11. Any pumps that are running will continue to run for their

 

respective pump delay times before turning off, unless

 

programmed

 

to

remain

on

continuously.

 

A 60 second anti-cycle period will start, which will delay any new

 

call for heat until it times out.

 

 

 

 

 

 

 

 

12. In Standby, ready to start a new cycle.

 

 

 

 

 

 

 

 

 

 

 

 

Access modes

User

The user can adjust space heating and tank target temperatures by pressing the NAVIGATION dial when “￿SETPOINTS” is flashing at the bottom of the display. The date and time, and the temperature units can also be changed (see page 60).

Installer

Most parameters are available only to the installer, accessible by entering the installer password, see the Knight Wall Mount Service Manual.

Saving parameters (reference the Parameter Table in the Knight Wall Mount Service Manual)

NOTICE

Please note that the brackets ([]) denote

screen status.

 

 

To save parameters and exit programming:

Press the RIGHT SELECT [SAVE] key and then press the RIGHT SELECT [HOME] key.

To enter a parameter and continue programming:

Press the RIGHT SELECT [SAVE] key 1 time to return to the parameter listings; press again to return to the menu listings. Remember to press the RIGHT SELECT [HOME] key when finished programming in order to save the changes made.

See the Knight Wall Mount Service Manual for a detailed description of parameters and access modes.

66

Page 66
Image 66
Lochinvar 51 operation manual Access modes, User, Installer

51 specifications

Lochinvar 51 is an innovative and robust residential boiler system designed for high-efficiency heating needs. A popular choice among homeowners, the Lochinvar 51 stands out in the market due to its advanced features and eco-friendly technologies.

One of the main features of Lochinvar 51 is its compact design, making it ideal for installation in limited space environments such as attics or closets. Despite its small footprint, it boasts a powerful heating capacity, suitable for varying home sizes. The boiler operates with a modulating gas burner that allows it to adjust its heat output according to the demand, ensuring efficiency and comfort throughout the day.

The Lochinvar 51 employs a cutting-edge heat exchanger made from stainless steel, which is highly durable and resistant to corrosion. This design not only enhances the boiler's performance but also increases its lifespan. The unit offers impressive AFUE (Annual Fuel Utilization Efficiency) ratings, showcasing its capability to convert a significant portion of fuel into usable heat, thus minimizing energy waste and reducing heating costs.

Technologically, the Lochinvar 51 is equipped with advanced control systems that facilitate precise temperature management. The intuitive interface allows homeowners to easily set their desired temperature and monitor the system’s performance. Additionally, the integration of outdoor reset technology helps optimize energy consumption by adjusting the water temperature based on outside weather conditions, leading to further energy savings.

Safety features are also paramount in the Lochinvar 51. It includes built-in safeguards that monitor pressure and temperature, automatically shutting down the system in case of any irregularities. This not only protects the boiler but also ensures peace of mind for users.

Moreover, Lochinvar 51 supports compatibility with smart home systems, providing homeowners with remote control capabilities via mobile devices. This innovative feature enhances user convenience, allowing for easy adjustments and monitoring of the heating system from anywhere.

In conclusion, the Lochinvar 51 is an exceptional choice for homeowners looking for a reliable, efficient, and technologically advanced heating solution. With its impressive heating capacity, durable design, and innovative control features, it sets a high standard in residential boiler performance, making it a top contender in today’s market.