HP LQH-HW 3ULQWHUV manual Serial Matrix Emulation, Control Code

Chapter 4 Emulation Menu

Serial Matrix Emulation

Printer

Protocol

(from page 80)

Serial

Matrix

Control Code

06

8.0LPI*

10.3LPI

6.0LPI

Define CR	Auto LF
Code
CR = CR*	Enable*
CR = CR + LF	Disable

Overstrike

Enable*

Disable

Define LF

Code

LF = LF*

LF = CR + LF

* = Factory Default

Printer

Select

Disable*

Enable

Alt. Set

80-9F

Control Code* Printable

Character

Set

(see page 94)

Esc d

command

Even dot plot* Double high

Control Code 06

Control Code 06 defines the function of ASCII code hex 06 (ACK). You can select an alternate line spacing of 6, 8, or 10.3 LPI.

Define CR Code

This option controls the action of the printer when it receives a Carriage Return code (hex 0D) from the host computer. If this feature is enabled, each time the printer receives a Carriage Return, it inserts an additional Line Feed code (hex 0A) into the data stream. Do not use this feature if the host computer sends Line Feeds to the printer.

•CR = CR. Does not insert an extra Line Feed after each Carriage Return.

•CR = CR + LF. Inserts an extra Line Feed after each Carriage Return. The next print position will be print position 1 of the next line.

Auto LF

The Auto LF option defines the printer actions when print data is received past the forms width setting.

•Enable. Performs an automatic carriage return and line feed when data is received past the forms width.

•Disable. Discards any data past the forms width.

92