HP LQH-HW 3ULQWHUV manual Copying Function Code To Your Computer

Preparation For Downloading

Table 4. LineJet Printer / LP Series Function Code Chart

		Control Panel Displays:	Download	Download	Minimum
Model	Description		File (as		Flash/DRAM
		(Emulation in Use)		Method
			shipped)		Required
C320xD	D printers using	ONLINE-ETHERNET / PCL II (or)	356351.exe	Via Network	4 MB Flash
C5640D	PCL-II emulation	ONLINE-ETHERNET / LP+	(Note 4)	(Note 1)	4 MB DRAM
(Note 1)
	D printers using	ONLINE-ETHERNET / LP+ (or)	356353.exe	Via Network	4 MB Flash
	VGL emulation	ONLINE-E-NET / CODE V / PCL	(Note 4)	(Note 1)	4 MB DRAM
	D printers using	ONLINE-ETHERNET/PGL/LP+ (or)	356352.exe	Via Network	4 MB Flash
	PGL emulation	ONLINE-ETHERNET/PCL-II	(Note 4)	(Note 1)	4 MB DRAM
		NOTES

*ONLINE - SERL / PCL II or ONLINE - SERL / LP PLUS if serial port is the selected host interface

1If the internal network card is not installed or was removed, download via the parallel or serial port. If the printer Function Code is downloaded with the LineJet Print Server removed, or a LineJet Print Server is added to the printer after downloading, the Ethernet port will not function with LineJet Printer Manager. In this case, do the following:

1.Press the up/down/right/left arrow keys simultaneously. Printer displays “FACTORY / Printer Management.”

2.Press the down arrow key. Printer displays “Diagnostic Port.”

3.Press the down arrow key. Printer displays “Debug Serial.”

4.Press the right arrow key. Printer displays “Debug Ethernet.”

5.Press ENTER. Printer displays “Debug Ethernet*.” Press ONLINE to exit.

2On an HP3000 MPE host system, if Page Level Recovery functionality is desired, the printer must be upgraded with the latest Function Code. The printer can be upgraded to the latest Function Code (Model C320xD) if CMX version 5.5 is present in the printer and 4 MB of Flash and 4 MB of DRAM are installed. “A” model printers may need a new CMX , 4 MB Flash and 4 MB DRAM. “B” model printers will need 4 MB Flash and 4 MB DRAM.

To upgrade “A” or “B” model Flash memory and DRAM, do the following:

1.Remove the 1 MB Flash (P/N 202554-001) and install a 4 MB Flash (P/N 202417-001) in Bank 0 of the flash SIMM sockets on the CMX PCA. (This is the flash socket closest to the front of the printer.)

2.“A” and “B” printers were shipped with 2 MB of DRAM (P/N 202502-001) installed in Bank 0 of the DRAM SIMM sockets. You can add another 2 MB DRAM to the rear DRAM socket on the CMX board, filling both sockets with 2 + 2 MB DRAM for the required total of 4 MB (the preferred) method), or you can install one 4 MB SIMM (P/N 202412-001) in Bank 0 of the DRAM SIMM sockets.

3

Upgrade to the latest Function Code (C320xD Function Code).

4

Check with Technical Support to confirm the latest available Function Code download file.

Copying Function Code To Your Computer

In order to download function code to a printer if using a serial or parallel port, the function code file must reside in a PC or laptop computer running any of the following operating systems: MS-DOS®, PC-DOS™, or DOS session on Windows 95/98, Windows NT or Windows 2000.

Note that the downloaded file, xxxxxx.exe, is a compressed executable file.

Leave the file as it is. Do not try to execute the file.

33