HP LQH-HW 3ULQWHUV Select Font, Select LPI, Auto Uppercase, Skip Cmd Prefix, Power on IGP/PGL

IGP/PGL Emulation

Select Font

This parameter allows you to select a font for the IGP/PGL feature. The default is 0, which is U.S. ASCII. The following values are valid choices:

0U.S. ASCII

1German

2Swedish

3Danish

4Norwegian

5Finnish

6English

7Dutch

8French

9Spanish

10Italian

11Turkish

Values 12-23 are undefined and will default to 0. You can set values 24-31 to specific fonts; refer to the USET command in the IGP/PGL Technical Reference Manual.

Select LPI

This is the number of lines to be printed per inch. For example, at 6 lpi there is 1/6 inch from the top of one print line to the top of the next print line.

Auto Uppercase

This parameter enables the printer to print text in all uppercase when using the ALPHA command.

•Disable. The printer will print text in upper and lowercase.

•Enable. The printer will print text in uppercase only.

Skip Cmd Prefix

This parameter determines if the printer will print any data before a PGL command is received.

•Enable. The printer ignores all data on the current line before an IGP command.

•Disable. The printer will print all data on the current line before an IGP command.

Power on IGP/PGL

You can set the IGP feature so that it is enabled or disabled when the printer is powered on.

•Enable. The PGL is enabled when the printer is powered on. (The PGL feature is initialized in the Normal mode.)

•Disable. The PGL is disabled when the printer is powered on. (The PGL feature is initialized to the Quiet mode.)

99