HP LQH-HW 3ULQWHUV Disable ioportdestination, Enable ioportdestination, Close tcp TCPindexnumber

Miscellaneous Commands

cancel jobID

cancel d1prn-10

Remove a job from an I/O port queue. Use lpstat to find a particular job ID first.

start foxttsloopb prn

start fox prn

Begin a debugging test on one of the I/O ports on the LineJet Print

Server. The tests available are:

	fox	A continuous stream of text sent to the attached printer. This
		is a good test for troubleshooting hardware as long as the
		attached printer supports text output.
	tts	A continuous stream of Gandalf 400C TTS-compatible text
		sent to the attached printer.
	loopb Loopback test. Any input characters from the device attached
		to the I/O port is echoed back.
	stop prn
	stop prn
	Stop an output test on an I/O port.
	disable ioportdestination
	disable prn
	Disable an ioport so that queued jobs are not printed, or disable a
	destination so jobs can not be queued to it.
	enable ioportdestination
	enable prn
	Enable an ioport so that queued jobs are printed, or enable a
	destination so jobs can be queued to it.
	close tcp TCPindexnumber
	close tcp 3
	Force a TCP/IP connection between a TCP/IP host and the LineJet Print
	Server to close. The TCPindexnumber can be retrieved from “debug tcp”
	output.
	ping [-s]hostIPaddress [datasize [packetnumber]]
	ping 192.75.11.30
	ping another TCP/IP host specified by hostIPaddress on the LineJet
	Print Server network. datasize is the datagram packet size which
	defaults to 64 bytes if no size is included in the syntax, and
	packetnumber is the number of requests to be sent.
Note	To use a host or IP name instead of the address, you must have set the
	DNS server on the LineJet Print Server. Use the command set sysinfo
	dns... to do this.

233