Dell E06S001 Memory detected, Invalid Dimm, Disabled No installed. Dimm detected, DIMMy

Message	Causes	Corrective Actions
Memory Riser <x>	The memory modules are not	Replace or reseat the
disabled - No	properly seated.	memory module(s). See
Memory detected.	The memory module	"Removing Memory
	connector may be exposed to	Modules" on page 105 and
	dust.	"Installing Memory Modules"
		on page 102.
	Unsupported memory
		Verify that the memory
	module.
		modules are identical and
		not in a locked step pair.

Memory Riser <x>	Unsupported memory
disabled -	modules in the first locked
Invalid DIMM.	step pair.

See "General Memory Module Installation Guidelines" on page 92.

Replace the memory modules. See "Removing Memory Modules" on page 105 and "Installing Memory Modules" on page 102.

Memory Riser <x> An empty memory riser is

disabled - No installed. DIMM detected.

Install memory modules in the riser. See "General Memory Module Installation Guidelines" on page 92.

DIMM	Unsupported memory	Ensure that the memory
unsupported:	modules on slots 3 to 8.	modules are installed in a
Memory Riser <x>		valid configuration. See
DIMM<y>		"General Memory Module
Memory Riser<x>		Installation Guidelines" on
Lockstep pair		page 92.
DIMM <y & z>
disabled
Please replace
the DIMM or
remove the
lockstep pair

48

About Your System