Dell E06S Series, E06S001 owner manual Dimm mismatch, Lockstep Pair

Message	Causes	Corrective Actions
DIMM mismatch:	Locked step pairs do not	Ensure that the memory
Memory Riser <x>	match.	modules match for a locked
Lockstep Pair		step pair. See "General
DIMM <y & z>		Memory Module Installation
disabled.		Guidelines" on page 92.
Please replace
the lockstep pair
with matching
DIMM(s).

MemBIST timeout: Memory riser<x> Locstep Pair DIMM <x & y> disabled.

Please replace the DIMM(s) or remove the lockstep pair.

MemBIST error: Memory riser(s) <x> Locstep Pair DIMM <x & y> disabled.

Please replace the DIMM(s) or remove the lockstep pair.

DDR training Error: Memory riser <x> DIMM <y>

Memory riser <x> lockstep pair <y & z> disabled.

Please replace the DIMM(s) or remove the lockstep pair.

The memory modules are not properly seated.

The memory module connector may be exposed to dust.

Faulty memory module.

Replace or reseat the memory module(s). See "Removing Memory Modules" on page 105 and "Installing Memory Modules" on page 102.

Ensure that the memory module connectors are clean.

About Your System

49