Dell E06S001, E06S Series owner manual Removing the Cooling Fan Assembly

Removing the Cooling Fan Assembly

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.

2Open the system. See "Opening the System" on page 89.

3If applicable, remove the memory-riser blanks. See "Removing a Memory- Riser Blank" on page 99.

4Remove the memory risers. See "Removing a Memory Riser" on page 100.

5Remove the fans from the cooling fan assembly. See "Removing a Cooling Fan" on page 116.

6Pull the blue release tabs in the direction of the arrows to release the handles on the cooling fan assembly. See Figure 3-17.

7Grasp the handles and lift the cooling fan assembly out of the system. See Figure 3-17.

118

Installing System Components