Dell E06S001, E06S Series owner manual SD module cable Dual SD module

5Disconnect the SD module cable.

6Pull back slightly on the tabs at the edge of the card and gently lift the edge of the card off of the retention standoffs.

7Install the I/O card. See "Installing the I/O Card" on page 135.

8Close the system. See "Closing the System" on page 90.

9Reconnect the system and peripherals to their power sources, and turn them on.

Figure 3-26. Removing and Installing the Internal Dual SD Module

3

4

2

1

1	retention standoff posts (3)	2	retention standoff tabs (3)
3	SD module cable	4	dual SD module

140

Installing System Components