Dell E06S001, E06S Series owner manual 114

6To remove the drive, press down and push the blue release tab toward the front of the system. See Figure 3-15.

7Slide the optical drive out of the system until it is free of the drive bay.

8If you are not adding a new optical drive, install the optical drive insert.

9If applicable, install the memory risers H, G, and D. See "Installing a Memory Riser" on page 101.

10Close the system. See "Closing the System" on page 90.

11Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

12If applicable, install the front bezel. See "Installing the Front Bezel" on page 87.

Figure 3-15. Removing the Optical Drive

2

3

1

1	optical drive	2	power/data cable
3	release tab

114

Installing System Components