Figure 3-33. Replacing the System Battery

1

2

3

1

positive side of battery connector

2

system battery

3

negative side of battery connector

 

 

3Locate the battery socket. See "System Board Connectors" on page 198.

CAUTION: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery.

4To remove the battery, support the battery connector by pressing down firmly on the positive side of the connector.

5Press the battery toward the positive side of the connector and lift it up out of the securing tabs at the negative side of the connector.

6To install a new system battery, support the battery connector by pressing down firmly on the positive side of the connector.

7Hold the battery with the "+" facing up and slide it under the securing tabs at the positive side of the connector.

8Press the battery straight down into the connector until it snaps into place.

9Close the system. See "Closing the System" on page 90.

10Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals.

158

Installing System Components

Page 158
Image 158
Dell E06S001, E06S Series owner manual Replacing the System Battery