Dell E06S Series Installing a Memory Riser, Release button Card guide Memory-riser connector

Figure 3-7. Removing and Installing a Memory Riser

1

2

3

5

4

1	handle	2	memory riser
3	release button	4	card guide
5	memory-riser connector

Installing a Memory Riser

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 89.

3If applicable, remove the memory-riser blank. See "Removing a Memory- Riser Blank" on page 99.

CAUTION: Before installing the memory riser, you must ensure that the memory module socket ejectors are in the locked position.

Installing System Components

101