Dell E06S001, E06S Series owner manual Integrated Devices Screen

Option	Description
USB Flash Drive	Determines the emulation type for a USB flash drive.
Emulation Type	Hard disk allows the USB flash drive to act as a hard
(Auto default)	drive. Floppy allows the USB flash drive to act as a
	removable diskette drive. Auto automatically chooses an
	emulation type.
	Auto automatically chooses the appropriate emulation
	type for the device, except for devices installed in the
	internal SD card slot. A device installed in the internal
	SD card slot will automatically emulate a hard drive. If
	you install a device in this slot that is configured as a
	removable diskette drive, you must manually set the
	emulation type to Floppy.
Boot Sequence Retry	If this field is enabled and the system has failed to boot,
(Disabled default)	the system will reattempt to boot after 30 seconds.

Integrated Devices Screen

Option	Description
Integrated SAS Controller	Enables or disables the integrated SAS controller.
(Enabled default)
User Accessible USB Ports	Enables or disables the user accessible USB ports.
(All Ports On default)	Options are All Ports On, Only Back Ports On, and All
	Ports Off.
Internal USB Port	Enables or disables the internal USB port.
(On default)
Internal SD Card Port	Enables or disables the internal SD card port.
Redundancy	Enables or disables the internal dual SD module mirror
(Disabled default)	mode.
Embedded NIC1 and	Enables or disables the operating system interface of the
NIC2	embedded NICs. The NICs can also be accessed through
(Enabled default)	the system's management controller.
Embedded NIC3 and	Enables or disables the operating system interface of the
NIC4	embedded NICs. The NICs can also be accessed through
(Enabled default)	the system's management controller.

70

Using the System Setup Program and UEFI Boot Manager