Dell E06S001, E06S Series owner manual Processors, Removing a Processor

4Insert the RAID battery into the battery carrier. See Figure 3-28.

NOTE: While installing the RAID battery into the battery carrier, you must ensure that the RAID battery cable faces the chassis wall.

5Install the memory-riser guide. See "Installing the Memory-Riser Guide" on page 107.

6Install the memory risers. See "Installing a Memory Riser" on page 101.

7If applicable, install the memory-riser blanks. See "Installing a Memory- Riser Blank" on page 100.

8Close the system. See "Closing the System" on page 90.

9Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Processors

Removing a Processor

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Prior to upgrading your system, download the latest system BIOS version from support.dell.com and follow the instructions included in the compressed download file to install the update on your system.

2Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. When disconnected from AC power, press and hold the power button for three seconds to fully drain the system of stored power prior to removing the cover.

NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system.

3Open the system. See "Opening the System" on page 89.

4If applicable, remove the memory-riser blanks. See "Removing a Memory- Riser Blank" on page 99.

5Remove the memory risers. See "Removing a Memory Riser" on page 100.

148

Installing System Components