Figure 3-29. Installing and Removing the Heat Sink

2

1

1

release levers (2)

2

heat sink

CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped.

11Position your thumb firmly over the processor socket-release lever and release the lever from the locked position by pushing down and pulling out from under the tab. Rotate the lever 90 degrees upward until the processor is released from the socket. See Figure 3-29.

12Use the tab on the processor shield to rotate shield upward and out of the way. See Figure 3-29.

150

Installing System Components

Page 150
Image 150
Dell E06S001, E06S Series owner manual Installing and Removing the Heat Sink Release levers