Dell E06S Series, E06S001 Disabled SMI, Channel training, Disabled Memory, Buffer, Communication

Message	Causes	Corrective Actions
Memory Riser <x>	The memory riser connector	Reseat the memory riser(s).
disabled - SMI	is not properly seated.	See "Removing a Memory
channel training	The memory riser connector	Riser" on page 100 and
failure.	or the processor socket may	"Installing a Memory Riser"
		on page 101.
Memory Riser <x>	be exposed to dust.
disabled - Memory	The processor has bent pins.	Ensure that the memory riser
Buffer		connectors and processor
communication		sockets are clean.
error.		Verify that there are no bent
		pins on the processor. If the
		processor has bent pins, see
		"Getting Help" on page 203.

Memory Riser <x> disabled - MemBIST error.

Memory Riser <x> disabled - MemBIST timeout.

Memory Riser <x> disabled - Rank not found.

Memory riser <x> disabled - DIMM communication error

Memory Riser <x> disabled - DDR training failure

Memory Riser <x> disabled - Simple memory test failure.

The memory modules are not properly seated.

The memory module connector may be exposed to dust.

Unsupported memory module.

Replace or reseat the memory module(s). See "Removing Memory Modules" on page 105 and "Installing Memory Modules" on page 102.

Ensure that the memory module connectors are clean and supported memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 92.

About Your System

47