Dell E06S Series Current boot mode, Is set to Uefi, Please ensure, Compatible, Bootable media is

Message	Causes	Corrective Actions
Current boot mode	The system failed to boot	Ensure that the boot mode is
is set to UEFI.	because UEFI boot mode is	set correctly and that the
Please ensure	enabled in BIOS and the	proper bootable media is
compatible	boot operating system is non- available. See "Using the
bootable media is	UEFI.	System Setup Program and
available. Use		UEFI Boot Manager" on
the system setup		page 63.
program to change
the boot mode as
needed.
Embedded NICx and	The operating system NIC	Check the system
NICy:	interface is set in BIOS. The	management software or the
OS NIC=<ENABLED	Management Shared NIC	System Setup program for
DISABLED>,	interface is set in	NIC settings. If a problem is
Management	management tools.	indicated, see
Shared NIC=		"Troubleshooting a NIC" on
<ENABLED		page 175.
DISABLED>

Error 8602 - Auxiliary Device Failure. Verify that mouse and keyboard are securely attached to correct connectors.

Mouse or keyboard cable is	Reseat the mouse or
loose or improperly	keyboard cable.
connected.

Defective mouse or keyboard. Ensure that the mouse or keyboard is operational. See "Troubleshooting a USB Device" on page 174.

Gate A20 failure	Faulty keyboard controller;	See "Getting Help" on
	faulty system board.	page 203.
General failure	The operating system is	This message is usually
	unable to carry out the	followed by specific
	command.	information. Note the
		information, and take the
		appropriate action to resolve
		the problem.

About Your System

45