162 Installing System Components
4
If applicable, remove the memory-riser blanks. See "Removing a Memory-
Riser Blank" on page 99.
5
Remove the memory risers. See "Removing a Memory Riser" on page100.
6
Remove the cooling fan assembly. See "Removing the Cooling Fan
Assembly" on page118.
7
Slide the board upwards andpull the board toward the front of the system
until the tabs on the board are free from the securing slots on the chassis.
See Figure3-35.
Figure 3-35. Power Distribution Board
1 power distribution board connector 2 power distribution board
3 tabs (2) 4 securing slots (2)
3
4
2
1
book.book Page 162 Wednesday, January 20, 2010 10:20 AM