134 Installing System Components
I/O Card

Removing the I/O Card

CAUTION: Many repairs may only be done by a certified service technician.
Youshould only perform troubleshooting and simple repairs as authorized in
yourproduct documentation, or as directed by the online or telephone service
andsupport team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
withthe product.
1
Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2
If applicable, disconnect the external cables connected to the I/O card.
3
Open the system. See "Opening the System" on page 89.
4
Grasp the card by its edges and lift the card to remove it from the I/O card
connector. See Figure3-1 for the location of the I/O card in the system.
5
If applicable, remove the internal dual SD module. See "Removing the
Internal Dual SD Module" on page 139.
6
If applicable, remove the iDRAC6 enterprise card. See "Removing an
iDRAC6 Enterprise Card" on page138.
book.book Page 134 Wednesday, January 20, 2010 10:20 AM