Dell E06S Series Sata port, Device auto, Seek error, Seek operation, Shutdown failure, Amount

Message	Causes	Corrective Actions
SATA port x	The drive connected to the	Replace the faulty drive.
device auto-	specified SATA port is faulty.
sensing error
SATA port x
device
configuration
error.
SATA port x
device error
Sector not found	Faulty hard drive, USB	Replace the USB medium or
Seek error	device, or USB medium.	device. Ensure that the USB
		or SAS backplane cables are
Seek operation
		properly connected. See
failed
		"Troubleshooting a USB
		Device" on page 174 or
		"Troubleshooting a Hard
		Drive" on page 186 for the
		appropriate drive(s) installed
		in your system.
Shutdown failure	General system error.	See "Getting Help" on
		page 203.

The amount of	Memory has been added or
system memory has	removed or a memory
changed.	module may be faulty.

If memory has been added or removed, this message is informative and can be ignored. If memory has not been added or removed, check the SEL to determine if single-bit or multi-bit errors were detected and replace the faulty memory module. See "Troubleshooting System Memory" on page 181.

Time-of-day	Faulty battery or faulty chip. See "Troubleshooting the
clock stopped.	System Battery" on page 178.

About Your System

55