Dell E06S001, E06S Series owner manual Installing a Memory-Riser Blank, Removing a Memory Riser

Installing a Memory-Riser Blank

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Align the memory-riser blank with the slots on the memory-riser guide and the cooling fan assembly.

2Insert the memory-riser blank firmly into the card guide until it is fully seated.

3Close the system. See "Closing the System" on page 90.

4Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

Removing a Memory Riser

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 89.

3Press the release button on the memory riser to release the handle.

4Grasp the handle and lift the memory riser out of the system.

CAUTION: To maintain proper system cooling, all empty memory-riser slots must have memory-riser blanks installed.

5Install a memory-riser blank. See "Installing a Memory-Riser Blank" on page 100.

6Close the system. See "Closing the System" on page 90.

7Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

100

Installing System Components