Dell E06S Series, E06S001 owner manual Removing and Installing the I/O Card

Figure 3-24. Removing and Installing the I/O Card

1

	2
1	I/O card	2	I/O card connector

Installing the I/O Card

1If applicable install the iDRAC6 Enterprise card. See "Installing an iDRAC6 Enterprise Card" on page 136.

2If applicable, install the internal dual SD module. See "Installing the Internal Dual SD Module" on page 141.

3Holding the card by its edges, position the card so that the card-edge connector aligns with the I/O card connector.

4Insert the card-edge connector firmly into the I/O card connector until the card is fully seated.

Installing System Components

135