Dell E06S Series DellMemBIST, Timeout Memory, Riser x Dimm, Memory address, Line failure at

Message	Causes	Corrective Actions
DellMemBIST	The memory modules are not	Replace or reseat the
timeout: Memory	properly seated.	memory module(s). See
riser <x> DIMM	The memory module	"Removing Memory
<y>		Modules" on page 105 and
	connector may be exposed to
Memory riser <x>	dust.	"Installing Memory Modules"
		on page 102.
lockstep pair	Faulty memory module.
DIMM <x & y>		Ensure that the memory
disabled.		module connectors are clean.
Please replace
the DIMM(s) or
remove the
lockstep pair.
DellMemBIST
error: Memory
riser <x> DIMM
<y>
Memory riser <x>
lockstep pair
DIMM <x & y>
disabled.
Please replace
the DIMM or
remove the
lockstep pair.
Manufacturing	System is in manufacturing	Reboot to take the system
mode detected.	mode.	out of manufacturing mode.
Memory address	Faulty or improperly installed	See "Troubleshooting System
line failure at	memory modules.	Memory" on page 181.
address, read
value expecting
value.
Memory double	Faulty or improperly installed	See "Troubleshooting System
word logic	memory modules.	Memory" on page 181.
failure at
address, read
value expecting
value.

About Your System

51