HP LQH-HW 3ULQWHUV manual Set Commands, Set date year month day, Set dest destination name newname

Set Commands

not buffer any data when there is a blocked situation with the printer. Normally it is best to have both keepalive and disbufmgmt enabled.

store tcpip tcp access [root] adddel IPaddress

store tcpip tcp access add 192.75.11.25

Add or remove an entry from the LineJet Print Server TCP access list defined by IPaddress. If the list has an entry, only this host can print to and remotely interact with the print server.

store tcpip from default

Set all TCP/IP network settings back to factory defaults.

store tcpip from current

Store all current TCP/IP network settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

Set Commands

These settings alter the current or working settings in memory only. Therefore, they will be lost if the LineJet Print Server is power cycled. To ensure this does not happen, be sure to issue a save command so the current settings get written to flash memory.

set date year month day

set date 1997 02 10

Set the current date noting the four-digit year, the two-digit month from 01 through 12, and the day being the number in the month. If the LineJet Print Server is reset, this value will be lost so you will need to set the date again.

set dest destination name newname

set dest d1prn name laser

Change the current name of the destination to a new name as indicated by newname. This newname must be nine characters or less or it will be truncated. These names are case sensitive.

set dest destination backchannel prn [prn]

set dest d1prn backchannel prn

Establish a return path for printer feedback for a given destination. Since the LineJet Print Server I/O port is bi-directional, however, you will most likely use the same I/O port that the destination is currently sending jobs to.

set dest destination model modelname set dest d1prn model m4

Associate a model with a destination. Jobs sent to the named destination are processed according to the options defined in the named model.

set dest destination logpath logpathname

set dest d1prn logpath l4

Associate a logpath with a destination. Jobs sent to the named destination are logged according to the settings defined in the named logpath.

223