HP LQH-HW 3ULQWHUV Changing Destination Names, Http//192.75.11.9/destConf.html, D2prn, D3prn

Chapter 8 Windows LineJet Print Server Configuration

Changing Destination Names

When defining some printers within Windows environments, the LineJet Print Server requires that you specify a pre-defined destination rather than any name you would like. For example, when creating a new printer under Windows NT, you are presented with a screen similar to Figure 11.

Figure 11. Windows NT Print Setup Dialogue Box

The first field requires the IP address for the LineJet Print Server and the second field must be filled in with a valid destination from the print server (e.g., d1prn). Otherwise, LPR will not be able to access the printer. Table 12 outlines the default destinations to choose from.

Table 12. LineJet Print Server Default Destinations

Destination	Mapped I/O Port
d1prn	PRN
d2prn	PRN
d3prn	PRN
d4prn	PRN

This name can be changed to something more meaningful using the built-in HTML forms. To do this:

1.Load a Web browser on your Windows station and direct it to the URL http://LineJetIPaddress/destConf.html

(e.g., http://192.75.11.9/destConf.html)

Note	If prompted for a User ID and password first, type in root for the ID and
	press ENTER at the password prompt since there is no password by
	default.

2.At the Print Path Configuration HTML form that displays, select a destination link from the top of the page to bring up the appropriate destination form. By default, you should see a line near the top of the form showing the destinations listed in Table 12.

3.Once the desired destination HTML form displays, highlight the “Name” field and type in the new name for this destination.

4.Click on the SUBMIT button when done and physically repower the print server to make the new setting take effect.

152