Konica Minolta 5550/5570 manual Configuring the Printer, Tray Mapping Mode

Item		Description
Tray Chaining	Tray Chaining	If Enable is selected and the specified
		paper tray runs out of paper during print-
		ing, a paper tray loaded with paper of the
		same size is automatically selected so
		printing can continue.
		If Disable is selected and the specified
		paper tray runs out of paper, printing
		stops.
		Choices: Enable, Disable
		Default: Enable
		Configuration Menu Equivalent:
		PAPER MENU - PAPER
		SOURCE - TRAY CHAINING
Tray Mapping	Tray Mapping	Select whether or not the Tray Mapping
	Mode	function is used.
		Choices: On, Off
		Default: Off
		Configuration Menu Equivalent:
		PAPER MENU - PAPER
		SOURCE - TRAY MAPPING
		- TRAY MAPPING MODE
	Logical Tray	Select the tray that is used for printing
	0-9	when a print job is received from another
		manufacturer’s printer driver.
		The default setting for LogicaL Tray 1 is
		Physical Tray1. The default setting for all
		other trays is Physical Tray2.
		Choices: Physical Tray1, Physical Tray2,
		Physical Tray3, Physical Tray4
		Configuration Menu Equivalent:
		PAPER MENU - PAPER
		SOURCE - TRAY MAPPING
		- LOGICAL TRAY0-9
		" Physical Tray3 and Physical Tray4
		appear only if an optional lower
		feeder unit is installed.
Apply button		Applies the configuration settings for this
		window.

218 Configuring the Printer